slave module

英 [sleɪv ˈmɒdjuːl] 美 [sleɪv ˈmɑːdʒuːl]

网络  从模块; 模组; 从属模块

计算机



双语例句

  1. As the basic SoC design technique, the AHB bus interface design consists of master module interface design and slave module interface design.
    AHB总线接口设计划分为主控模块接口设计及从模块接口设计。
  2. The communication module sends wireless messages between master module and slave module.
    通信模块用于在主控模块与从控模块之间进行无线通信。
  3. Therefore, in the hardware design module, the paper adopts Slave FIFO mode which is the most suitable for continuous and high-speed data transfer and uses FIFO to buffer the data streams;
    因此,在硬件设计模块,我们采用了最适合连续高速数据传输要求的SLAVEFIFO模式,并采用FIFO对数据流进行缓冲;
  4. This paper describes a newly designed general signal processor, which consists of TMS32020 processor, several slave processors and a monitor module.
    本文介绍一种以TMS32020主处理板、多块从处理板和监控板为核心组成的通用数字信号处理机。
  5. The slave module controls the recording module for channel selection, recording startup/ end and sends the data to the master module.
    从控模块直接控制信号采集模块,选取采集通道,启动或停止采集,并将数据进行打包后向上级传输。
  6. The Application and Analysis of TAS Slave Module in Power Plant
    汽轮发电机组自动同期子模件在电厂中的应用与分析
  7. The products of the work go as followed: ① develope the uniform ASI slave module, which could be linked with many kinds of sensors. The condition of slaves can be configured by the master.
    课题的研究成果有:(1)开发了统一的ASI从站模块,可以接各种传感器,从站的信息可以由主站来配置;
  8. In the hardware design part, the hardware design scheme of USB data upload and download modules, USB host and slave modules and FPGA module is proposed; the connection mode among these modules is also shown.
    在硬件设计部分,给出了USB数据上传和下载模块、USB主机和设备模块及FPGA模块具体的硬件电路的设计方案以及模块之间的连接关系。
  9. A PC Based VME Slave Module Testing System
    基于PC机的VME总线从设备调试系统
  10. Finally, by the analysis of the mode 1 of wireless channel and real-time requirement of industrial data transmission, a basic MAC mechanism, master/ slave polling algorithm is introduced in the design wireless data transmission module.
    最后,在对工业无线信道模型和工业信号的实时性要求进行分析的基础上,提出了设计无线数传模块所要采用的基本MAC机制&主/从Polling算法。
  11. This system is a new on-line monitor system. It is consisted of a master station, which is a computer with intelligent CAN-bus interface unit, and a slave station, which is a monitor module for battery parameter measure.
    本系统是一种新型在线监测系统,它由带CAN通讯适配卡的主站和用于蓄电池参数测量的从站&监测模块组成。
  12. In terms of software, it introduces the working flow of the master module and the slave module.
    软件方面主要介绍了主模块和子模块的通信流程。
  13. As slave control part, sub-user controller calculates and temporarily stores power sent from measuring module;
    从控部分子用户控制模块计算并暂存电能测量模块输出功率数据;
  14. This system is a smart slave module with single-chip-microcomputer.
    本系统为带有单片微型计算机的智能化模块。
  15. Secondly, after introducing the main frame of the topic, this disquisition introduced the three modules of this topic in detail: the slave module which consists of sensor, examination circuit and MCU;
    其次,在介绍了本课题的主体框架之后,详细介绍了本课题的三个组成模块:由传感器、检测电路和单片机构成的下位机模块;
  16. In this paper, the function of USB slave controller is presented and its module constitution of a solution is introduced.
    文章介绍了USB从控制器所要完成的功能和一种实现方案的模块构成,并且说明了实现USB协议的处理流程。
  17. Embedded USB Host/ Slave Application Module
    嵌入式USB主/从机应用模块
  18. In the slave system, native database storage module, Modbus/ TCP data processing module and exception handles module were designed in use of modularization idea.
    对于子站,采用模块化设计思想,分别设计了本地数据库存储模块、远程数据传输模块、故障处理模块。
  19. On the aspect of intelligent slave station interface module, this research develops a PROFIBUS intelligent slave station interface module by using the PROFIBUS protocol chip ( SPC3) and single chip.
    在智能从站接口模块开发方面,采用PROFIBUS-DP协议芯片SPC3与单片机开发出PROFIBUS-DP智能从站接口模块,并对所开发的智能从站接口模块进行了实验验证。
  20. The paper completes the hardware design of the intelligent slave node module which implement the CAN bus communication with nodes being divided into two types functions: temperature measurement and motor control.
    论文完成了具有CAN总线通讯功能的智能从节点模块的硬件设计,节点具有温度测量和电机控制两种功能。
  21. According to the communication protocol, the communication software for master module and slave module are developed, and the process of each subroutine is given. The PC communication and configuration software is developed based on VC++ 6.0.
    根据所制定的通信协议,分别为系统主站模块与从站模块开发了通信软件,给出了各个子程序流程,并基于VC++6.0开发了上位机通信与配置软件。
  22. Finally, by setup testing environment, complete the communication between master station and slave station, and complete control of master station to I/ O module of the embedded slave station.
    最后搭建主从站通信的测试环境,进行主从站连接通信测试以及对嵌入式从站I/O口的控制的测试。
  23. The internal modules of slave FPGA equipment mainly include: the VME bus cycle, the interrupt request module, timer module and so on.
    从设备FPGA内部模块主要包括本地总线周期,VME总线周期,中断请求器模块,以及定时器模块等。
  24. From the point of the winding equiment control requirements and the actual industrial production, the embedded control system is composed of a master control module, a winding control slave module and I/ O extention slave modules.
    从卷绕机控制要求和实际工业生产角度出发,整个嵌入式控制系统由主控制模块、卷绕控制从模块和I/O扩展从模块组成。
  25. When users use these slave station interface cards, they can choose the corresponding software driver module according to the card.
    用户在使用从站接口卡时,选择与之对应的软件驱动模块进行控制。